Version=5

[General]
Name="AMERALABS TGM7" ;003
Heater Temperature=0
Heater Enable=false

;___405*
[:/Gen-405/General]
Printer Classes=[Pico, "Pico 2", PRO, "PRO UV405", MAX, "PRO 4K UV405"]
Slice Thickness Presets=[0.15, 0.05, 0.03]
Slice Thickness = 0.015

[:/Gen-405/Curing]
Light Intensity=3 ; with S200 -> Object 1mW
Support Exposure=300

Z=[	1.3	,	0.03	,	1.09	]
Z=[	1.8	,	0.05	,	1.09	]
Z=[	2.6	,	0.07	,	1.09	]
Z=[	3.6	,	0.09	,	1.09	]
Z=[	5.0	,	0.11	,	1.09	]
Z=[	7.0	,	0.13	,	1.09	]
Z=[	9.8	,	0.15	,	1.09	]
Z=[	13.8	,	0.17	,	1.09	]
Z=[	19.3	,	0.19	,	1.09	]
Z=[	27.0	,	0.21	,	1.09	]
Z=[	37.8	,	0.23	,	1.09	]
Z=[	52.9	,	0.25	,	1.09	]
Z=[	74.1	,	0.27	,	1.09	]
Z=[	103.7	,	0.29	,	1.09	]
Z=[	145.1	,	0.31	,	1.09	]
Z=[	659.6	,	0.4	,	1.09	]

Offset=0.090 ;4.4
;Z Compensation=0.03
;B=0.1  M=0.0 bei 1mW // B=0.18 M=0.06 bei 5mW
Burn-In Layers=1
Burn-In Exposure=0.280
Burn-In XY Compensation=-0.1
Border Exposure=36 
Border Width=0.050
;XY Scale=1.006
;XY Compensation=-0.005

[:/Gen-2UV/General]
Printer Classes=["Pico UV385", "PRO UV385", "MAX UV385", "PRO 4K UV385"]
Slice Thickness Presets=[0.15, 0.05, 0.025]
Slice Thickness = 0.025

[:/Gen-2UV/Curing]
Light Intensity=5 ;for 15 mic layers
Support Exposure=190 ;Offset 135

;MAX UV; 18.01.2019;
;Z=[7.6, 0.03, 7.04]

Z=[	1.0	,	0.03	,	7.13	]
Z=[	1.4	,	0.05	,	7.13	]
Z=[	2.0	,	0.07	,	7.13	]
Z=[	2.9	,	0.09	,	7.13	]
Z=[	4.0	,	0.11	,	7.13	]
Z=[	5.7	,	0.13	,	7.13	]
Z=[	8.1	,	0.15	,	7.13	]
Z=[	11.5	,	0.17	,	7.13	]
Z=[	16.3	,	0.19	,	7.13	]
Z=[	23.1	,	0.21	,	7.13	]
Z=[	32.7	,	0.23	,	7.13	]
Z=[	46.4	,	0.25	,	7.13	]
Z=[	65.7	,	0.27	,	7.13	]
Z=[	93.1	,	0.29	,	7.13	]
Z=[	632.3	,	0.4	,	7.13	]

Offset=0.090 ;4.4
;Z Compensation=0.03
;B=0.1  M=0.0 bei 1mW // B=0.18 M=0.06 bei 5mW
Burn-In Layers=1
Burn-In Exposure=0.280
Burn-In XY Compensation=-0.1
;Fill Exposure=110 
Border Exposure=36 
Border Width=0.050
;XY Scale=1.006
;XY Compensation=-0.005


[Delays]
Burn-In Wait Time (After Exposure)=2
Burn-In Wait Time (After Separation)=5
Normal Wait Time (After Exposure)=0.1
Normal Wait Time (After Approach)=0.1

[:/MAX-Platform/General]
Printer Classes=["MAX UV385",MAX]

[:/MAX-Platform/Mechanics]
Traverse Timeout Range=100
Motor Timeout=90
Separation Pressure Limit=150 ; g/cm²
;//High speed parameters
Separation Velocity=2.475 ; mm/s
Separation Acceleration=1
Viscosity Range=0.4
Layer Tolerance=10
Separation Distance=10

[:/4K/General]
Printer Classes=["MAX UV385",MAX]

[:/4K/Mechanics]
Traverse Timeout Range=100
Motor Timeout=90
Separation Pressure Limit=300 ; g/cm²
Separation Velocity=2.475 ; mm/s
Separation Acceleration=0.2
Separation Deceleration=18
Approach Acceleration=18
Approach Deceleration=18
Viscosity Range=0.4
Layer Tolerance=10
Separation Distance=10

[:/PRO-Platform/General]
Printer Classes=["PRO UV385", "PRO UV405"]
Slice Thickness Presets=[0.05, 0.075, 0.1]
Slice Thickness = 0.1

[:/PRO-Platform/Mechanics]
Separation Distance=12 ; mm
Separation Velocity= 3; mm/s
Approach Velocity= 10; mm/s
Slides Per Layer=0 ;
;Smart Slide Threshold=1000
;Smart Slide Lag=0.5

[:/PRO-Platform/Delays]
Burn-In Wait Time (After Exposure)=2 ; s
Burn-In Wait Time (After Separation)=10 ; s ; for material flowback
Burn-In Wait Time (After Approach)=60 ; s
Burn-In Wait Time (After Slide)=0 ; s
Normal Wait Time (After Exposure)=0 ; s
Normal Wait Time (After Separation)=0 ; s ; for material flowback
Normal Wait Time (After Approach)=2 ; s
Normal Wait Time (After Slide)=0 ; s

[Support]
Leveling=true
Leveling Height=2.0
Tallest=false
Tallest Height=0.0
Slope=35
Side Feature=2.0
Spacing=2.0
Strength=40
Torsion=0
Intersupport=true
Contact=0.4
Overshoot=0.3
MaximumWidth=0.8
Side Faces=20
AspectRatio=1.5
